Had a contractor come and paint kitchen cabinets. They sprayed the faces and brushed / rolled the frames. I was told I would not be able to tell the difference between spraying and rolling when they were done. Per pics this was clearly not the case.
Top coat is SW Emerald Urethane thinned at 15%. Frame primer was zinnser bin and door primer was SW extreme bond (suggested by contractor because it sprayed easier)
Contractor is proposing to come back and sand / repaint with a different paint than Emerald and says he will thin it significantly to get a smooth result.
Does this sound right and what other options are there to fix this?
Pics of sprayed face be door frames below: